Ergonomic Hazard Identification of Workers Engaged In Brick Making Factories

Back to Peer Resource
EHSQ Content Team's picture
EHSQ Content Team

Community Content Team

Ergonomic Hazard Identification of Workers Engaged In Brick Making Factories

Abstract:This study was done with the aim to identify the specific ergonomic risk factors in the workplace affecting the both male and female workers while doing raw brick making activities and to analyze the pain/discomfort related to it. Twenty male and twenty female workers from the raw brick making unit were randomly selected and a detailed ergonomic risk factors were analyzed with the help of NIOSH Ergonomic Hazard Identification checklist. The questions were based on the primary job responsibility of the workers. Data revealed that nearly 8 percent males and 10 percent females were in ‘usually’ category, 25 percent males and 28 percent females in ‘sometimes’ and approximately 18 percent male and 13 percent females who never performed the task were kept in the category ‘never’. It was found that all the male and female workers usually require exerting force with their hands and used the hand tools to do the task. About 8 percent males and 5 percent females were usually, 15 percent male and only 10 percent female were sometimes and 28 percent males and 35 percent female were never stood continuously for a period of more than 30 minutes. On the whole all the male and female respondents were lifting or lowering the objects between floor and waist height or shoulder height and most of the workers were becoming exposed to the vibration while performing the task and they were carrying the weight more than 50 lb. The study indicates that the majority of the activities are in the high risk category and demands immediate ergonomic intervention in the form of tool, workstation and process design.

Kumkum Pandey* and Aditi Vats Department of Family Resource Management, Govind Ballabh Pant University of Agriculture and Technology, Pantnagar- 263145 (Uttarakhand), INDIA *Corresponding author. E-mail: kumkum.pandey.unique@gmail.com Received: March 3, 2013; Revised received: June 25, 2013; Accepted: July 15, 2013

Manufacturing Health & Safety Whitepapers

This Peer Resource hasn't been commented on yet.
Login or Sign Up to comment.